Learn How to Create Your Own Homemade Waterproofing to Stop Roof Leaks!

By Lilia

Are you looking for a way to waterproof your furniture, walls or roofs without spending a lot of money? So, learn how to create your own homemade waterproofing! This is a great way to save money and ensure your surfaces are protected from moisture.

Today we will show you two types of waterproofing. The first is simpler and covers what is necessary to perhaps reinforce the membrane or the waterproofing that we have placed on the roof. However, the second is the most effective, but of course it requires a little more effort, but I assure you that it justifies it.

What is waterproofing?

A waterproofer is a chemical product that is applied to surfaces to prevent moisture from penetrating them. This is especially useful for surfaces such as furniture, walls and roofs, as moisture can damage these surfaces if not treated properly.

What do you need to create your own homemade waterproofing?

To create your own homemade waterproofing, you will need the following materials:

• A container to mix the ingredients.
• A cup of baking soda.
• A cup of white vinegar.
• A cup of water.
• A spray bottle.

You might be interested in: Tricks to increase water pressure in faucets and rain for showers (shower)

How to create your own homemade waterproofing

1. Mix the baking soda, white vinegar and water in the container.

2. Shake the mixture until the ingredients are well mixed.

3. Pour the mixture into the spray bottle.

4. Shake the bottle to make sure the ingredients are well mixed.

5. Apply the waterproofer to the surface you want to waterproof.

6. Allow the waterproofing to dry completely before using the surface.

Advantages of using homemade waterproofing

Using homemade waterproofing has many advantages, including:

• It is an economical way to waterproof your surfaces.

• The ingredients are easy to find and are non-toxic.

• It is a safe way to protect your surfaces against moisture.

• It is a simple and fast process.

Homemade waterproofing with lime

You will need:

  • ½ kg of lime.
  • ½ kg of alum
  • 1 aluminum container
  • 2 bars of white zote soap
  • Water

Preparation of waterproofing with lime

1. Start adding the water and lime to the container. Bring this mixture to a boil on the stove and let it simmer for a few minutes.
2. With the help of a grater, grate the soap bars and alum and mix them to create a fine powder.
3. When the water has reached the boiling point, add the soap and alum mixture and stir it into the boiling liquid until it is completely dissolved.
4. After a few minutes, remove the mixture from the heat and let it cool for a few minutes.
5. Once the mixture has cooled, go to the area where the cracks are and carefully pour the mixture into the cracks.
6. Use a spatula to spread the mixture evenly and make sure it is well compacted in the cracks.
7. Allow the mixture to dry and harden for several hours before using it.

We recommend the following:

  • Before beginning the waterproofing process, it is essential to sweep the deck and remove any loose material that may be present. Once the roof is clean, you can begin applying the waterproofing mixture.
  • It’s best to cover the entire roof if possible, but if not, at least cover areas prone to water damage.
  • When the rain has stopped, wait for the slab to dry for at least three days before proceeding.
  • Finally, reapply the mixture a few days later to give a second coat to reinforce the homemade waterproofing and ensure that the roof is well protected. This will provide extra protection and help ensure that the waterproofing stands up to the elements.